Note 2:
Pressing the up or down arrow on the navigator ( ) provides access to additional personal directory
entries softkeys.
On the main (perso) page, press the softkey next to the user you want to call, for example
"MAROLEX Eléon.".
Figure 2.2: Calling via the Set Directory Example
A telephone area corresponding to the user you want to call is displayed on the screen.
Figure 2.3: Telephone Area Example
The above example indicates that the user you want to call is free.
You may:
- Call this user (Ring softkey)
- Not call this user (Release softkey)
- Send a call-back request to this user (Call back softkey)
2.2.3 Dial (Call) by Name
This feature is used to select a party by name. "Dial by name" can be requested either from
idle state or when in conversation.
Chapter
2
#$ %!#
2-2
! "
To Next Page
Loading...
