Alcatel-Lucent IP Touch 4068 - Automatic;Manual Answer; Answering an Internal Call

2.5.1 Automatic/Manual Answer
There are two operating modes to answer a call:
- Automatic answer to take automatically any incoming call or any call that is waiting during
call routing
- Manual answer which requires an attendant action to take a call
To select the desired answer operating mode, see Alcatel-Lucent IP Touch 4068 Attendant Set
- Management from the Attendant Set - Selecting Answer and Transfer Operating Modes
Following methods to answer a call concern manual answer operating mode.
2.5.2 Answering an Internal Call
When receiving an internal call, the Alarm LED located at the top of the attendant set flashes
in green.
The screen displays:
Figure 2.27: Internal Call on Next page (Example)
Pressing the softkey next to the name of the caller (or pressing the OK key of the navigator)
displays the following screen:
Figure 2.28: Telephone Area Example (Internal Call in Conversation)
Chapter
2
#$ %!#
2-16
    ! "       