Alcatel-Lucent IP Touch 4068 - Selecting the Display Language; Configuring Ringing Options

- Auto transfer feature enabled when the checkbox next to the Auto transfer label is
validated: a consultation call is immediately transferred when the called set is free
- Auto transfer feature disabled when the checkbox next to the Auto transfer label is not
validated: a consultation call is transferred only when Transfer softkey is pressed, see
Alcatel-Lucent IP Touch 4068 Attendant Set - Basic Features - Consultation Call
4.3.3 Selecting the Display Language
Select the display language from the languages available within the system:
1. In the menu page, navigate to: Settings -> Phone -> Language
2. Enter the password and press the Apply softkey.
The screen displays the Language page
3. Select the language you wish to use on the set from the available options, by pressing the
corresponding softkey.
Pressing the up or down arrow on the navigator ( ) provides access to additional
languages, if available.
4. Confirm language selection by pressing the OK fixed key.
The screen displays Programming accepted
Figure 4.11: Selecting the Display Language
4.3.4 Configuring Ringing Options
The call ringing melody on the attendant set can be selected from 16 available melodies. Each
melody has 9 different volume levels. The ringing type (no ringing, normal, delayed, etc...) can
also be selected.
4.3.4.1 Selecting the Melody
1. In the Menu page, navigate to: Settings -> Phone -> Ringing
2. Enter the password and press the Apply softkey.
The screen displays the Ringing page
3. Press the Melody softkey.
The screen displays the Melody page, which offers 16 different melodies
Chapter
4
&' (!'   
4-8
    ! "       