Putting the Attendant Set in Service ............................................... 2.1
Methods for Calling a Number ........................................................... 2.1
Direct Dialing .................................................................................................2.1
Calling via the Set Directory ..........................................................................2.1
Dial (Call) by Name .......................................................................................2.2
Call by Speed Dialing ....................................................................................2.4
Calling an Internal User ....................................................................... 2.4
Reserving (Locking) an Internal User Set ......................................................2.4
The Called Set is Free ...................................................................................2.5
The Called Set is Busy ..................................................................................2.7
Special Cases: Unreachable or Forwarded Sets ...........................................2.9
Calling an External User .....................................................................2.14
Answering Calls .....................................................................................2.15
Automatic/Manual Answer ............................................................................2.16
Answering an Internal Call ............................................................................2.16
Answering an External Call ..........................................................................2.17
Answering a Call to the Attendant Group .....................................................2.17
The Attendant Does Not Answer Immediately ..............................................2.18
Answering a Callback Request .....................................................................2.19
Putting a Call on Hold ..........................................................................2.20
Consultation Call ...................................................................................2.21
Consultation Call to an Internal User ............................................................2.21
Consultation Call to an External User ...........................................................2.24
Initializing a Three-Party Conference ...........................................................2.26
Call Transfer (routing) .........................................................................2.26
Automatic/Manual Transfer ..........................................................................2.27
Transfer to a Busy Set ..................................................................................2.27
Routing Participants to a Meet-Me Conference .........................2.28
The Conference Circuit is Free .....................................................................2.29
The Conference is In Progress .....................................................................2.29
Chapter 3
Additional Features
#!
0-2
! "
To Next Page
Loading...
