8–5Test Your Clutch/Brake
Publication
65566.5.1 - October 1996
Valves and Valve Feedback
Test output wiring and input feedback to/from press valves by
“ringing out” your I/O connections using the following table. Check
the OK? box after verifying each connection.
Important: Disconnect one side of each solenoid valve to guard
against current flow through solenoids. Reconnect them when done.
For Ungrounded AC Wiring
From Chassis A To Chassis B & Solenoids OK?
Mod Grp Wire Number Term Mod Grp Term -
5 AO:005/00 1 2 13
5 AO:005/01 3 2 15
5 AO:005/02 5 N/A A" 904SOL
5 AO:005/03 7 N/A B" 905SOL
5 AO:005/04 11 2 7
5 AO:005/05 13 2 11
5 AO:005/06 15 N/A A" 909SOL
5 AO:005/07 17 N/A B" 910SOL
5 AO:005/10 21 4 1
5 AO:005/11 23 4 3
5 AO:005/12 25 N/A A" 914SOL
5 AO:005/13 27 N/A B" 915SOL
From Chassis B To Chassis A & Solenoids OK?
Mod Grp Wire Number Term Mod Grp Term -
5 BO:005/00 1 2 13
5 BO:005/01 3 2 15
5 BO:005/02 5 N/A A" 904SOL
5 BO:005/03 7 N/A B" 905SOL
5 BO:005/04 11 2 7
5 BO:005/05 13 2 11
5 BO:005/06 15 N/A A" 909SOL
5 BO:005/07 17 N/A B" 910SOL
5 BO:005/10 21 4 1
5 BO:005/11 23 4 3
5 BO:005/12 25 N/A A" 914SOL
5 BO:005/13 27 N/A B" 915SOL
To Next Page
Loading...
