2–6 Define Your Control System Characteristics
Publication
65566.5.1 - October 1996
We provide you with wiring drawings on paper and diskette for ac power:
• grounded
• ungrounded
Important: Select the type of ac wiring system used for your press.
Discard the other set of drawings on paper and diskette to avoid confusion.
Other options relate to the way you:
• wire your control system for application options
• program ladder logic in PF15
We tell you how to implement these options in chapters 3 and 4.
Refer to the list of options and corresponding wiring drawings and/or
command bits in the worksheet. Browse through the wiring
drawings and select wiring-related options on the worksheet.
You may program shorter watchdog timer presets but never longer
presets. We show you how in chapter 4. On the worksheet, check the
timers you want to change and record their shorter presets.
8. Select Other Options
9. Reduce Watchdog Timer
Presets (Optional)
To Next Page
Loading...
