Rockwell Automation Publication 1756-UM022D-EN-P - May 2017 115
Develop Safety Applications Chapter 6
9. If the Connection Reaction time limit is acceptable, click OK; or for
more complex requirements, click Advanced to set the Advanced
Connection Reaction Time Limit parameters.
The Timeout Multiplier determines the number of RPIs to wait for a
packet before declaring a connection timeout.
The Network Delay Multiplier defines the message transport time that
is enforced by the CIP Safety protocol. The Network Delay Multiplier
specifies the round-trip delay from the producer to the consumer and
back to the producer. You can use the Network Delay Multiplier to
increase or decrease the Connection Reaction Time Limit.
Table 36 - More Resources
Resource Description
Pages
80…82 Provides more information on setting the RPI and understanding
how the Max. Network Delay, Timeout Multiplier, and Network
Delay Multipliers affect the Connection Reaction Time
Chapter 9 Contains information on the CONNECTION_STATUS predefined
data type
Logix5000 Controllers Produced and Consumed
Tags Programming Manual,
publication
1756-PM011
Provides detailed information on using produced and consumed
tags
To Next Page
Loading...
