Rockwell Automation Publication 1756-UM022D-EN-P - May 2017 29
Install the Controller Chapter 2
Remove the SD Card
Follow these steps to remove the SD card.
1. Turn the key switch to the PROG position.
2. Open the door to access the SD card.
3. Press and release the SD card to eject it.
4. Remove the SD card and close the door.
IMPORTANT Verify that the SD card status indicator is off and that the card is not in use
before removing it.
Log
ix 55
xx
RUN
FORCE
SD
OK
32015-M
Log
ix 55
xx
RUN
FORCE
SD
OK
32004-M
To Next Page
Loading...
