Rockwell Automation Publication 1756-UM022D-EN-P - May 2017 19
System Overview Chapter 1
Programming Requirements
Use Table 7 to identify the programming tool and the versions for use with
your GuardLogix 5570 controllers.
Safety routines include safety instructions, which are a subset of the standard
ladder logic instruction set, and safety application instructions. Programs that
are scheduled under the safety task support only ladder logic.
For information on how to use these features, refer to the Logix5000™
Controllers Common Procedures Programming Manual, publication
1756-PM001, the publications that are listed in Additional Resources on page
11, and online help.
Table 7 - Software Versions
Cat. No. Studio 5000®
Environment
RSLogix 5000®
Software Version
(1)
(1) For information on how to use a GuardLogix controller with RSLogix 5000 software, see GuardLogix Controllers User Manual,
publication 1756-UM020, and GuardLogix Controller Systems Safety Reference Manual, publication 1756-RM093.
RSLinx® Classic
Software Version
1756-L71S, 1756-L72S,
1756-L73S, 1756-L73SXT
21 or later 20 or later 2.59 or later
Table 8 - Supported Features
Feature
Studio 5000 Logix
Designer Application
Version 24 and Later
Safety Task Standard Task
Add-on instructions X
X
Alarms and events
Controller logging
X
Data access control
Equipment phase routines
Event tasks
Firmware supervisor X
Function block diagrams (FBD)
Integrated motion
Ladder logic
X
Language switching
Memory card
Network address translation (NAT)
Online import and export of program components
Safety and standard connections X
Sequential function chart (SFC) routines
Structured text
Unicast connections for produced and consumed safety tags
X
Unicast connections for safety I/O devices on EtherNet/IP networks
To Next Page
Loading...
