Rockwell Automation Publication 1756-UM022D-EN-P - May 2017 9
Preface
This manual is a guide for when a GuardLogix® 5570 controller is used in a
Studio 5000 Logix Designer® application. It describes the GuardLogix-specific
procedures that you use to configure, operate, and troubleshoot your
controller.
Use this manual if you are responsible for the design, installation,
programming, or troubleshooting of control systems with GuardLogix 5570
controllers.
You must have a basic understanding of electrical circuitry and familiarity with
relay logic. You must also be trained and experienced in the creation, operation,
and maintenance of safety systems.
For detailed information on related topics for GuardLogix controller, Safety
Integrity Level (SIL) 3 and Performance Level (e) (SIL 3/PLe) requirements,
or information on standard Logix components, see the list of
Additional
Resources on page 11.
Summary of Changes
We added the 1756-L72EROMS and 1756-L73EROMS Armor™ GuardLogix
controllers to this user manual.
Topic Page
Summary of Changes 9
About GuardLogix Controllers 10
Terminology 11
Additional Resources 11
To Next Page
Loading...
Need help?
General
