Publication 1747-RM001G-EN-P - November 2008
15-8 Messaging Examples
The type of MSG instruction is Remote.
Local Bridge Address is the node number of the passthru DH-485 processor.
Remote Bridge Address is not required.
Remote Station Address is the node number of the target processor. A DF1
Full-duplex target device does not require a Remote Station Address.
Remote Bridge Link ID is the Link ID number of the DF1 destination
network.
For the step by step procedure for this example, refer to Knowledgebase
Document Number: G63059559.
To Next Page
Loading...
