Allen-Bradley Stratix 8000 User Manual

106 Rockwell Automation Publication 1783-UM007G-EN-P - February 2017
Chapter 4 Install Stratix 5410 Switches
3. Install or remove the card.
To install the card, slide it into the slot, and press it firmly in place until
it latches in the spring loaded mechanism. The card is keyed so that you
cannot fully insert it the wrong way.
To remove the card, push it in and let it pop out via the spring-loaded
mechanism. Grasp the card top and pull it out. Place it in an antistatic
bag to protect it from static discharge.
4. Close the guard door and fasten the captive screw by using a screwdriver
to keep the door in place.
32568-M
16
13
Disp.
Mode
EIP Mod
EIP Net
Setup
GPS
TimeCD
3 1
4 2
Out
1 2
Speed
Duplex
PRP
DLR
PoE
Express
Setup
Alarms PSU
1
4
5
8
9
12
13
16
1
7
20
21
2
4
27
28
25
26
1
4

Allen-Bradley Stratix 8000 Specifications

General

Brand	Allen-Bradley
Model	Stratix 8000
Category	Switch
Language	English