74 Rockwell Automation Publication 1783-UM003G-EN-P - December 2012
Chapter 3 Manage the Switch via the Device Manager Web Interface
4. Click Done.
Ending IP Address The ending IP address that defines the range of addresses in the DHCP IP address pool. The format is a 32-bit
numeric address written as four numbers separated by periods. Each number can be from 0…255.
Make sure that none of the IP address you assign are being used by other devices in your network.
This field is required.
Default Router The default router IP address for the DHCP client that will be using this server. The format is a 32-bit numeric
address written as four numbers separated by periods. Each number can be from 0… 255.
This field is required.
Domain Name The domain name for the DHCP client. The name can have up to 31 alphanumeric characters. The name cannot
contain a ? or a tab.
DNS Server1 and 2 The IP addresses of the Domain Name System (DNS) IP servers available to a DHCP client. The format is a 32-bit
numeric address written as four numbers separated by periods. Each number can be from 0…255.
WINS Server1 and 2 The IP addresses of the primary and secondary Microsoft NetBIOS name servers (WINS servers) available to a
DHCP client. The format is a 32-bit numeric address written as four numbers separated by periods. Each number
can be from 0…255.
Lease Length The duration of the lease for an IP address that is assigned to a DHCP client. Click either:
• Never Expires
• User Defined
If you click User Defined, enter the duration of the lease in the numbers of days, hours, and minutes. This lease
length is used for all assignments.
DHCP Address Pool Settings
Setting Description
To Next Page
Loading...
Need help?
General
