BIBI 850-BL Use and maintenance manual Rev.00
12
1.7 CE Declaration of Conformity
See facsimile of CE declaration of conformity enclosed with this manual.
The machine described in this manual complies with the following standards:
▪ Directive 2006/42/EC – Machinery Directive that amends Directive 95/16/EC
▪ Legislative Decree 17/2010 – Implementation of Machinery Directive 2006/42/EC related to
the machine
▪ UNI EN 280:2013 - Mobile elevating work platforms - Design calculations - Stability criteria -
Construction - Safety - Examinations and tests
▪ UNI EN 349:2008 – Minimum gaps to avoid crushing of parts of the human body
▪ EN ISO 12100:2010 Safety of machinery -General principles for design - Risk assessment and reduction
All parts available on the market and “partly completed machinery” installed in platform BIBI 850-BL
conform to the aforementioned Directives and those that specifically govern the product.
1.8 Warranty
ALMAC S.r.l. guarantees the equipment it manufactures and undertakes to replace, free of charge and within
the shortest possible time, those parts that, in its opinion, possess manufacturing and/or material defects.
The machines are guaranteed for a period of 12 months from the date of delivery.
Work under warranty must only be performed by workshops authorized by ALMAC S.r.l. and only
when the Customer is up to date with the payments.
Consignment of the equipment for the required work and its successive collection after the repairs have
been made are at the Customer's care and expense. The Customer will not be entitled to work under
guarantee unless he consigns the equipment for repair within 30 days from the date of the first
complaint, to be made in writing.
With the exception of fraud or gross negligence, ALMAC S.r.l. is relieved of all liability towards the
Customer for damage deriving from flaws/defects in the traded equipment.
The warranty with which the Customer is provided becomes void if modifications are made to the
machines without prior written authorization from ALMAC S.r.l. or should the Customer make
incorrect/improper use of the machines.
The seller must in any case be notified of flaws/defects discovered in such terms within and no later
than 8 days from their discovery under penalty of forfeiture of the warranty itself.
1.8.1 Request for interventions during warranty period and
formalities
ALMAC S.r.l. must be notified of requests for spare parts or technical interventions under
guarantee as soon as a defect is discovered.
Always indicate the type of machine and its serial number when requesting spare parts under
guarantee or technical interventions under guarantee. This information is given on the
equipment identification plate.
To Next Page
Loading...