BIBI 850-BL Use and maintenance manual Rev.00
69
Before performing the operation, make sure the platform is IN THE COMPLETELY
LOWERED TRANSPORT POSITION
Once the pushbutton panel has been removed from the basket, use the strap to carry it FIRMLY AND
SECURELY to avoid manoeuvring errors.
When driving in this condition BE CAREFUL TO NOT ENTER IN CONTACT WITH THE
PLATFORM TRACKS.
REMAIN THE PROPER DISTANCE AWAY, USING THE FULL LENGTH OF THE
PUSHBUTTON CONTROL PANEL CABLE
Once the transport phase is complete, replace the pushbutton panel.
4.4 Use of ground controls
The BIBI 850-BL has a command console located on the chassis in the rear of the machine. These
controls are useful for the operator on the ground for platform maintenance or for emergency situations
(red mushroom button).
The ground controls are protected against unauthorized use by a key that is used to activate the 3 way
switch.
THE KEY MUST ALWAYS BE AVAILABLE TO THE RECOVERY OPERATOR OR THE
INDIVIDUAL WHO PERFORMS OPERATIONS ON THE GROUND.
Involuntary activation of the ground controls is prevented by the automatic key selection: turning
it to the "basket controls" (RIGHT) position automatically disables the ground controls while selecting
the "ground controls" position (LEFT) automatically disables the command console.
Attention: only personnel who have been properly trained and skilled in using the controls
may use those controls.
IT IS FORBIDDEN to stay inside the basket while another operator performs manoeuvres
with the ground controls.
To Next Page
Loading...