EasyManua.ls Logo

ALMAC BiBi 850-BL - Inspections During Use

ALMAC BiBi 850-BL
127 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BIBI 850-BL Use and maintenance manual Rev.00
29
2.7 Inspections during use
It is forbidden to use ladders or other structures in the basket to increase the height of the machine.
It is forbidden to work near high voltage overhead electric power lines. Moreover, the basket must
always keep at a safety distance of at least 5 meters from cables.
Do not use the machine during storms. You could be struck by lightning.
Use the MEWP only within the allowed temperature range (see Performance)
It is forbidden to get on or off the MEWP when the platform is raised
It is forbidden to load or unload objects from the MEWP when the platform is raised.
The carrying capacity of the MEWP is the work load for which the platform has been designed and
includes the weight of the operators and the tools used for their specific tasks (see relative data
plate)
Do not CHANGE DIRECTION on kerbs, rocks or appreciable differences in level (> 20 cm) when
driving the machine. In this case, always proceed perpendicularly to the obstacles.
If you must drive up a slope, do not change direction when the ground
changes from flat to sloping. If this is absolutely necessary, perform the
manoeuvre gradually.
Do not drive along the edge of slopes or over uneven ground with one
track horizontal and the other slanting or partially raised (>10°) as this
will damage the tracks. ALWAYS PROCEED WITH THE TRACK
SHOES RESTING ON THE SAME HORIZONTAL PLANE.
Driving over an obstacle creates a gap between the bearing rollers and
track, which could consequently slip out of its housing.

Table of Contents