BIBI 850-BL Use and maintenance manual Rev.00
13
1.9 Assistance
As far as the optimum use of the machine and extraordinary maintenance are concerned, this manual
does not replace the experience of the Technical Assistance sent by ALMAC S.r.l. (also refer to Chapter
6 Maintenance).
1.9.1 Request for assistance and repairs
To request ALMAC S.r.l. specialized Assistance Service, the Customer may contact:
ALM
AC S.r.l.
Viale Ruggeri 6/A
42016 – Guastalla (RE) - Italy
email: info@almac-italia.com
Tel. +39-0522-1495486
When requesting assistance interventions, always indicate the model of the machine and its
serial number: this data is given on the identification plate.
1.10 Use of the manual
Note: K
eep this manual in an accessible place known to all users (operators and maintenance workers).
Note: This m
anual must be kept in a protected place inside the compartment provided in the basket so that it can
be ea
sily accessed for consultation throughout the entire technical life of the machine.
Note: I
f this manual is lost or damaged, a new copy must be ordered from the manufacturer. Specify the serial
num
ber of the machine (given on the relative identification plate) when requesting a new copy of the manual.
T
he manufacturer undertakes to provide a new copy.
Note: When se
lling used equipment, this manual and the related attachments must be included and the
m
anufacturer must be informed of the new owner (see Appendix 3 - Transfer of Ownership)
Read carefully Chapter 1 General Information, Chapter 2 Safety information, Chapter 3 Description of the Machine and
Perfo
rmance, Chapter 4 Operating instructions, Chapter 5 Emergency Procedures.
Always consult the relative chapter when using, servicing the machine or when it is demolished.
To Next Page
Loading...