BIBI 850-BL Use and maintenance manual Rev.00
81
Tan
k oil level gauge
6.7 Hydraulic tank oil changes
The hydraulic oil in the dedicated tank must be changed at the frequency indicated in the general chart,
in any case every 2 years.
Drain out the used oil through the drain plug at the rear of the machine, underneath the ladder. Collect
the used oil in a suitable vessel and dispose of it in the proper way.
RECOMMENDED HYDRAULIC OIL
It is advisable to use IP “HYDRUS OIL H.I. 46” oil with the
following specifications:
Density a
t 15°C= 0.880
Viscosity at 100°C= 7.7
Viscosity index= 144
Flash point - open cup= 220°C
Pour point= -27°C
Hydraulic oil
level
To Next Page
Loading...