BIBI 850-BL Use and maintenance manual Rev.00
98
6.18 Track inspection and tensioning
Check track tension at the inspection frequency indicated in the general chart.
If the track sags and becomes too noisy as it moves, it must be tightened as described below:
1) Remove the guards (1)
2) For proper track tension use a tensioning kit (2) - not included - and pump grease in the
tensioning valve (3) until it reaches the pressure indicated below. Consult the grease chart on
the next pages for the type of grease required.
M
ax pressure track tensioning 150 Bar
To Next Page
Loading...