BIBI 850-BL Use and maintenance manual Rev.00
89
Then start the platform. The warning buzzer should begin to operate and the tilt limit angle (see figure
below) indicator should come on and be STEADY
Max
imum inclination indicator light
Lift the basket with the button and make sure the automatic levelling system brings the platform back
to horizontal. Perform the test in the 2 directions.
CHECK WITH 1° OF LATERAL INCLINATION
Tilt the platform by placing the shims indicated in the figure below, underneath the tracks near the
roller centre line (inclination reached >1°):
S2= 61 mm
Then start the platform. The warning buzzer should begin to operate and the tilt limit angle (see figure
below) indicator should come on.
Maximum inclination indicator light
Lift the basket with the button and make sure the automatic levelling system brings the platform back
to horizontal. Perform the test in the 2 directions.
S2
To Next Page
Loading...