49
2. Tap .
3. There is only one line in the list of route points, the starting point of the route, which is normally the
current GPS position.
4. Tap to select the destination.
5. The New Route to... screen appears, where you can select the destination of the route the same
way as described in the previous sections.
6. When the selected location appears on the map, tap and the list returns. If
needed, you can add further intermediate destinations.
7. To add more route points, tap or tap to change the final
destination. The Add to Route... menu appears again, where you can select the new route point
the same way as you have set the destination before.
8. (optional) Tap to optimise the whole route or the order of waypoints. You can also delete all
the destinations.
9. When you have added all the route points, tap and the planned route is
automatically calculated.
To Next Page
Loading...
