Maneuver restrictions and directional constraints are taken into account when
planning a route.
Roads are used only if access for cars is allowed.
Private roads and resident-only roads are used only if they are inevitable to reach
the destination.
Walkways are excluded from routes.
All manoeuvres are available in intersections.
One-way streets are taken into account so that driving in the opposite direction is
allowed at low speed.
A private road is used only if the destination is there.
Walkways are excluded from routes.
Maneuver restrictions and one-way streets are taken into account when planning a
route.
Roads are used only if access for taxis is allowed.
Private roads, resident-only roads and walkways are excluded from routes.
5.3.1.1 Route Planning Method types
You can select from the following route planning method types:
Gives a quick route if you can travel at or near the speed limit on all roads. Usually,
the best selection for fast and normal cars.
Results in a route with fewer turns and no difficult manoeuvres. With this option,
you can make Alpine navigation take, for example, the freeway instead of a series
of smaller roads or streets.
Gives a short route to minimize the travel distance. It can be optimal for slow
vehicles. Searching for a short route regardless of the speed, this route type is
rarely optimal for normal vehicles.
To Next Page
Loading...
