Alpine INE-W970HD - Specifications

96 -EN
Specifications
MONITOR SECTION
Screen Size 6.5" (INE-W970HD)
LCD Type Transparent type TN LCD
Operation System TFT active matrix
Number of Picture Elements 1,152,000 pcs. (800 × 480 × 3
(RGB))
Effective Number of Picture Elements 99% or more
Illumination System LED
FM TUNER SECTION
Tuning Range 87.7 – 107.9 MHz
Mono Usable Sensitivity 9.3 dBf (0.8 μV/75 ohms)
50 dB Quieting Sensitivity 13.5 dBf (1.3 μV/75 ohms)
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio 65 dB
Stereo Separation 35 dB
AM TUNER SECTION
Tuning Range 530 – 1,710 kHz
Usable Sensitivity 25.1 μV/28 dBf
USB SECTION
USB requirements USB 2.0
Max. Power Consumption 1,500 mA (CDP Support)
USB Class USB (Mass Storage Class)
File System FAT16/32
Decoding Format MP3/WMA/AAC/FLAC/OGG/APE/MP2
Number of Channels 2-Channels (Stereo)
Frequency Response*1 5 – 20,000 Hz (±1 dB)
Total Harmonic Distortion 0.016% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 85 dB
Channel Separation 75 dB (at 1 kHz)
* 1 Frequency response may differ depending on the encoder software/bit rate.
HDMI SECTION
Input Format 480p/720p
GPS SECTION
GPS Reception frequency 1,575.42 ±1 MHz
GPS Reception sensitivity -130 dBm max.
Bluetooth SECTION
Bluetooth Specification Bluetooth V4.0
Frequency band 2,402 – 2,480 MHz
Output Power '-6~+4 dBm Ave. (Power class 2)
Profile HFP (Hands-Free Profile)
PBAP (Phone Book Access Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
GENERAL
Power Requirement 14.4 V DC
(11–16 V allowable)
Operating temperature -4°F to +140°F
(-20°C to + 60°C)
Power Output 16 W RMS × 4*2
• Power output: measured at 4 Ohms and ≤ 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Audio output level
Preout (Front, Rear): 4V/10k ohms (max.)
Preout (Subwoofer): 4V/10k ohms (max.)
Weight (unit only) 2.05kg
CHASSIS SIZE
Width 178 mm
Height 100 mm
Depth 142 mm
NOSE SIZE (FACE PLATE W/O)
Width 178 mm
Height 100 mm
Depth 21.3 mm