4.19 REPEATER MODE
The 2.4GHz Radio Repeater Mode is the combination of both AP mode and CPE Mode. CPE
mode configuration can be found in the Remote VAP and AP Configuration in VAP 1-15 as
shown in Figure 29.
Figure 239 Repeater Mode Configuration
4.20 BRIDGE MODE
The 5GHz Radio, Radio Operational Mode, Wireless Mode, Radio Frequency (Channel),
Transmit Power, Encryption Configuration, Advanced Settings and Remote Bridge
Configuration can be configured by selecting 5GHz Radio under Configuration in the menu
bar, as shown in Figure 30.
To Next Page
Loading...
