Amazone AMATRON 3 Operating Manual

Product description
AMATRON
3 BAG0094.6 02.15
15
4.5 GPS application
A GPS receiver is required for GPS application.
4.5.1 GPS switch (option)
When using agricultural machines, dosing errors cannot be prevented
entirely when switching the machine on or off on the headlands and
when driving across field edges.
Overlaps and other possible consequences can cause damage to the
plants, increased runoff in surface water bodies or lodge grain. These
disadvantages can be prevented using a GPS switch connected to a
GPS receiver.
The GPS-Switch enables positionally accurate switching on the head-
land, on the field edge or when driving around obstacles.
Boom, part width section or spreading characteristics of the respec-
tive machine are taken into account.
When driving around the field for the first time, the field borders are
recorded. Based on these borders, the GPS switch determines, de-
pending on the machine parameters, the position in the field at which
the device is switched on or off, or whether the working width has to
be changed.
A 50 hour test version has been released.
4.5.2 GPS track (option)
GPS track is used for track guidance on the field.
The application is integrated into the GPS switch, see page 86.
A 50 hour test version has been released.
4.5.3 GPS Headland
To generate a virtual headland.
The application is integrated into the GPS switch, see page 86.
A 50 hour test version has been released.
4.5.4 GPS-Maps importing application maps (optional)
Fields for which the application maps are imported, are processed
according to the stored set values. The set values can be edited after
import.
The application is integrated into the GPS switch, see page 86.
A 50 hour test version has been released.

Amazone AMATRON 3 Specifications

General

Brand	Amazone
Model	AMATRON 3
Category	Touch terminals
Language	English