Amazone AMATRON 3 Operating Manual

Use of the GPS switch application
AMATRON
3 BAG0094.6 02.15
83
11.8 Interrupting the work
When interrupting field work / switching of the operating terminal, pay
attention to the following:
• The reference point should be set.
• After the on-board computer is switched on again, the tilling
status of the field appears in the working display and work can
resume.
• Saving the field to a USB stick is necessary if tilling another field
after the interruption and before resuming work.
Field loaded after interrupting the work.

Amazone AMATRON 3 Specifications

General

Brand	Amazone
Model	AMATRON 3
Category	Touch terminals
Language	English