Amazone AMATRON 3 Operating Manual

TaskController Task management
36
AMATRON 3 BAG0094.6 02.15
8 TaskController Task management
Change to the TaskController menu
The TaskController is an application that represents an interface be-
tween the agricultural implement and the Farm Management System
on the operating terminal.
Using the TaskController, you can
• Master data and jobs are imported.
• Create master data.
• Create and edit jobs.
Master data that is imported from the Farm Management System
cannot be changed here.
The following functions are supported:
• create jobs in the terminal.
• view and process tasks which were planned with the aid of the
agricultural field record.
• transfer application maps from a job to the GPS switch.
• send defaults to the ISOBUS task manager.
• document implementation of the work. The type of documented
data depends on the type of the ISOBUS task manager.
• save the working results so they can evaluated using the PC
software.
• record job data without gaps.
USB stick
The USB stick has two roles:
• it is used to transfer data between the agricultural field record
and the terminal.
• it is used as an external memory during operation.
The USB stick must always be plugged in during operation.
Display - USB stick not inserted / Task Data folder not created:
The TaskController consists of the
• Jobs
• Master data

Amazone AMATRON 3 Specifications

General

Brand	Amazone
Model	AMATRON 3
Category	Touch terminals
Language	English