Amazone AMATRON 3 Operating Manual

Use of the GPS switch application
78
AMATRON 3 BAG0094.6 02.15
11.4.2 Assign new reference point
The following procedure is needed to set a new reference point:
1. Loading the field
2. Calibrating the field
→ Now you can set a new reference point or select one from the
list
11.4.3 Using RTK-GPS
This procedure presupposes use of an RTK station.
A reference point should also be set when using an RTK station as
this makes a calibration of the field possible when the RTK signal
fails.
• Processing the GPS data when setting or
calibrating the reference point takes approx-
imately 15 seconds and is indicated on the
display.
•
Confirm the reference point.

Amazone AMATRON 3 Specifications

General

Brand	Amazone
Model	AMATRON 3
Category	Touch terminals
Language	English