Amazone AMATRON 3 Operating Manual

Terminal Setup
AMATRON
3 BAG0094.6 02.15
27
7.2 Tractor ECU (simulated)
The tractor ECU of an ISOBUS tractor transmits tractor data that is
required by the implement.
In the simulated tractor ECU, tractor data for several tractors can be
entered manually.
The tractor ECU (simulated) must be created and active:
• For all AMABUS implements
AMABUS implements cannot adopt any data from an ISOBUS
tractor.
• For ISOBUS implements, if no ISOBUS tractor is available.
ISOBUS implements require an ISOBUS tractor for data trans-
fer.
• For ISOBUS implements, if the coupling data of the ISOBUS
tractor should not be used.
Coupling data (entries for the tractor geometry) that is required
for switching using the GPS switch.
A separate connecting cable is required for this purpose, see
Page 13.
Tractor ECU created and active -
Tractor ECU created and not active -
Display selectable tractors:
Display tractor data:
• create additional tractor
•
edit selected tractor
•
delete selected tractor

Amazone AMATRON 3 Specifications

General

Brand	Amazone
Model	AMATRON 3
Category	Touch terminals
Language	English