Amazone AMATRON 3 Operating Manual

TaskController Task management
AMATRON
3 BAG0094.6 02.15
45
8.3 Working with or without the TaskController
• Switching the TaskController on/off.
The TaskController application can be run in two modes:
• With job management using TaskController
ο The TaskController is fully functional.
ο Before starting work, a job must be started in TaskControl-
ler.
• Without job management using TaskController
ο Implement-internal job management active
ο Use this mode if you do not use the TaskController or it has
not been activated.
ο GPS switch is possible without TaskController.
ο Only the connected implement is displayed.
ο Possible to work without a USB stick.
This is how to change the mode of the TaskCon-
troller application:
•
with job management using
TaskController
•
without job management using
TaskController (implement-internal job
management)

Amazone AMATRON 3 Specifications

General

Brand	Amazone
Model	AMATRON 3
Category	Touch terminals
Language	English