AMATRON 3 BAG0094.6 02.15
The lead tracks are random contours.
• Smoothed contour → The lead tracks contain curves where the
radius of the first lead track is adjusted accordingly. Next to the
inner curve, the radius gets smaller; next to the outer curve, the
radius gets larger.
• Identical contour → The lead tracks contain curves where all
lead tracks correspond with the first lead track.
When travelling the beds, one lead track is not travelled after the
other, but one or more lead tracks are left out and worked later.
Thus, the adjacent lead track can be avoided when manoeuvring.
The lead track interval is to be entered.