Commissioning the GPS application
AMATRON 3 BAG0094.6 02.15
Not for fertiliser spreaders and ISOBUS field sprayers!
Only for seed drills and AMABUS field sprayers!
• The lead in/delay off time is used for setting a seamless working
of the field
ο During the transition from non-worked to worked areas.
ο During the transition from worked to non-worked areas.
• The size of the overlapping/underlapping depends, amongst
other things, on the forward speed.
• The lead in/delay off time is a time entry in milliseconds.
• Longer lead in/delay off times and higher speeds may lead to
undesired switching conditions.
Optimal working of the field
(1) Headlands / worked field
(2) Seamless working of the field without overlapping
Overlapping of worked areas
Lead in/delay off time for switching off
Lead in/delay off time for switching on
(A) Length of the overlap
• Switching off - Entering a worked area:
ο Sprayer: decrease lead in/delay off
time.
ο Seed drill: increase lead in/delay off
time.
• Switching on – Moving off a worked area:
ο Sprayer: decrease lead in/delay off
time.
ο Seed drill: decrease lead in/delay off
time.
To Next Page
Loading...
Need help?
General
