Amazone AMATRON 3 Operating Manual

Use of the GPS switch application
AMATRON
3 BAG0094.6 02.15
85
11.10 REC for manual device geometry
For machines without automatic part width sec-
tion control
1. Switch on the boom part width sections
manually on the machine.
and simultaneously
2.
Begin with the recording of the
worked field.
3. Every time boom part width sections are
switched off with
, interrupt the re-
cording at the same time.
Once the field borders have been recorded by driving around the
perimeter, the field borders can be created and saved in the terminal,
and used for machines with automatic part width section control.

Amazone AMATRON 3 Specifications

General

Brand	Amazone
Model	AMATRON 3
Category	Touch terminals
Language	English