Amazone AMATRON 3 Operating Manual

Commissioning the GPS application
AMATRON
3 BAG0094.6 02.15
63
Correction times for switch on / off delay times when overlapping / unworked areas
Length of the overlapping (A) / Length of the unworked area (B)
0,5 m
1,0 m
1,5 m
2,0 m
2,5 m
3,0 m
Forward speed
[km/h]
5
360 ms
720 ms
1080 ms
1440 ms
1800 ms
2160 ms
6
300 ms
600 ms
900 ms
1200 ms
1500 ms
1800 ms
7
257 ms
514 ms
771 ms
1029 ms
1286 ms
1543 ms
8
225 ms
450 ms
675 ms
900 ms
1125 ms
1350 ms
9
200 ms
400 ms
600 ms
800 ms
1000 ms
1200 ms
10
180 ms
360 ms
540 ms
720 ms
900 ms
1080 ms
11
164 ms
327 ms
491 ms
655 ms
818 ms
982 ms
12
150 ms
300 ms
450 ms
600 ms
750 ms
900 ms
13
138 ms
277 ms
415 ms
554 ms
692 ms
831 ms
14
129 ms
257 ms
386 ms
514 ms
643 ms
771 ms
15
120 ms
240 ms
360 ms
480 ms
600 ms
720 ms
Correction times for speeds and distances (A, B) which are not listed
can be interpolated / extrapolated or calculated using the following
formula:
Correction times for switch on / off delay times [ms]
=
Length [m]
x
3600
Tractor speed [km/h]
The lead in/delay off times for seeding technology for switching on
and off is influenced by the following factors:
• Delivery times depending on the
ο Seed type
ο Delivery path
ο Blower speed
• Driving behaviour depending on the
ο Speed
ο Acceleration
ο Braking
• GPS accuracy depending on the
ο Correction signal
ο Update rate of the GPS receiver
For precise switching on the headland – particularly in the case of
seed drills – the following points are essential:
• RTK precision of the GPS receiver (update rate min. 5 Hz)
• Even speed when driving onto and leaving the headland

Amazone AMATRON 3 Specifications

General

Brand	Amazone
Model	AMATRON 3
Category	Touch terminals
Language	English