1-10 | Model 241CE II Hydrocarbon Dewpoint Analyzer
Supplemental Information – Where Can I Find It?
Some analyzers are configured with optional equipment, that may require
supplementary information. The analyzer manual and this additional
information (not part of the main manual) – collectively known as the
Documentation Package – is included on the Documentation Package DVD
shipped with the analyzer.
If a hard copy of the analyzer manual is ordered, the additional informa-
tion will be located in the “Supplemental Information” section of the
manual. See Chapter 7 for ordering information.
The Documentation Package DVD includes the following:
• The “Manual” folder contains the main analyzer manual, the System
200 Configurator Software manual (optional), and any other manuals
for standalone equipment that support the analyzer.
• The “Supplemental Information” folder can include documents called
Manual Supplements that describe and illustrate installation, operation,
layout, and maintenance procedures for non-standard or optional
equipment that make up your analyzer and its sample system.
This folder can also contain:
- 241_Dewpoint Monitor Data Sheets, which list the critical analyzer
operating parameters.
- 241_EEPROM Data Sheets, which list the factory-default configura-
tion settings of all programmable analyzer parameters.
- 241_Signed Final QC (Quality Control) Document, which includes
AMETEK Testing Quality Control information, including Gas Run
Data, for the analyzer.
- 241_Final As-Built drawings (if applicable). Note that these drawings
are not available for analyzers with “S####-#” in their serial num-
bers (e.g., “AB-241-S1234-5”). If these drawings are not included, use
the drawings in the manual.
- Other customer-specific information may also be included (if ap-
plicable), such as Product Data Sheets, a Custom Spare Parts list, or
analyzer Certificates.
NOTE
To Next Page
Loading...
Need help?
General
