Contents | vii
Safety Notes
WARNINGS, CAUTIONS, and NOTES contained in this manual emphasize critical instructions
as follows:
An operating procedure which, if not strictly observed, may result in personal injury or envi-
ronmental contamination. Essential Health and Safety Requirements are also included in
– but are not limited to – Warnings.
An operating procedure which, if not strictly observed, may result in damage to the equipment.
Important information that should not be overlooked.
Electrical Safety
High voltages are present in the analyzer housings. Always shut down power source(s) before
performing maintenance or troubleshooting. Only a qualified electrician should make electrical
connections and ground checks.
Any use of the equipment in a manner not specified by the manufacturer may impair the safety
protection originally provided by the equipment.
Grounding
Instrument grounding is mandatory. Performance specifications and safety protection are void if
instrument is operated from an improperly grounded power source.
Verify ground continuity of all equipment before applying power.
NOTE
!
CAUTION
!
WARNING
!
WARNING
To Next Page
Loading...
Need help?
General
