Ametek 241CE II

Specications | 2-17
CSA-certified Model 241CE I Analyzers are marked with this label:
301-1392-C
CLASS I, DIVISION 1 GROUPS C & D
Western Research Analyzer Model: 241CE II
___120Vac ___240Vac, 50/60 Hz, 275W
PROCESS INSTRUMENTS
SN: ________________________
Output signals: 4-20mA (30VDC Max) Relay Contacts 24VDC 0.5A Max
CLASS I ZONE 1 Ex d IIB T3C, Tamb. +40°C
A seal must be installed within 50mm [2"] of the enclosure
Un scellement doit être installé à moins de 50mm [2"] du boîtier
Keep covers tightly fastened and Measuring Cell installed while circuits are alive.
Garder les couvercles bien fermes et le detecteur installe lorsque les circuits
sont sous tension.
Caution/Attention:
R