6-22 | Thermox WDG-V / VC / VCM with Blow Back
Remote Calibration Unit (RCU)
0-60 PSI External Air Regulator 39004JE
0-60 PSI Regulator Gauge 37018JE
Aspirator Air Solenoid Valve (Normally Open) 36090JE
Calibration Gas Solenoid Valve (Normally Closed) 36088JE
Flow Meter 37020JE
0-15 PSI Internal Regulator 37070JE
* The RTD detector is the standard detector for most appications.
Requires sensor main processor board 8000-119-SE
** The Hotwire detector is the severe service detector. Consult factory for
applications. Requires sensor main processor board 8000-148-SE
*** Sensor assembly includes I/O connection board, main processor
board, and mounting plate
**** The block heater, RTD, and detector are not included
When ordering, provide the serial number of your analyzer to ensure proper
parts are ordered:
AMETEK
Process & Analytical Instruments Division
150 Freeport Road
Pittsburgh, PA, USA 15238
Phone: (412) 828-9040 Fax: (412) 826-0399
To Next Page
Loading...
Need help?
General
