1-4
S-4000
Revised 01/2005
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
SAFETY
WARNING! Before performing machine adjustments, press the red emergency stop push-button
located on top of the sewing head, ensure the red lamp flashes and the machine will not start.
The S-4000 buttonhole machine is carefully designed and manufactured to our high quality standards.
Special attention is focused on the convenience of operation and effective hazard protection for the
operating personnel.
S-4000 safety components:
Needle bar cover Needle break, eye shield Belt guard covers
WARNING!
Any piece of equipment may become dangerous to personnel when improperly operated or poorly
maintained. It is very important all personnel expected to operate or maintain this equipment be familiar with
the information contained in the parts and service manual.
It is recommended that AMF Reece service personnel supervise the installation and initial training of
your mechanics and operators.
The most effective employee hazard protection is a rigidly enforced safety program which includes
effective training in safe operating methods. Supplementary hazard protection, including guards and
covers, are useful when attached in the correct manner and properly maintained. Operators and
service staff should be required to wear safety glasses.
Safety Labels
Possible shock.
Located on the electrical
box cover door.
To Next Page
