3.2. Specification of fluids
3.2.6. Lubricating grease
Plastic grease containing lithium in compliance with NLGI-2
regulation (Mobilplex EP-1, Retinax A, Alvania, Grease No 3 etc.)
must be used to grease the machine.
ISO 6743/9 CCEB 2
DIN 51 502 KP2K-30
Replace water with antifreeze at temper-
atures below 0 °C (32 °F).
3.2.9. Windshield washer liquid
Water (at temperatures down to 0 °C) and windshield washer
agent are used as lls in the washer can.
3.2.7. ACE drum cooling liquid
Mixture:
53 l of water
14 kg of calcium chloride CaCL
2
0.3 kg of burnt lime CaO
The operating oil temperature must not
exceed 85 °C ÷ 90 °C (185 °F ÷ 194 °F).
3.2.5. Gearbox oil
Use high quality oils complying with API GL-5 or EP or MIL-
L-2105 C for lubricating the drum gearbox and axle (wheels)
drive gearboxes.
Viscosity SAE 80W/90 for outdoor temperature range -10 °C÷
+30 °C (14 °F ÷ 86 °F).
Viscosity SAE 80W/140 for outdoor temperature range +20 °C ÷
+45 °C (68 °F ÷ + 113 °F).
Oil for the drum vibration regulation gearbox: SAE 75W-90; API
GL-4/GL-5; MIL-L 2105E
3.2.8. Vibrator cooling mixture
Mixture:
55 l of water
17 kg of calcium chloride - CaCl
2
0,26 kg of slaked lime (calcium hydroxide) - Ca(OH)
2
To Next Page
Loading...
