108 ASC 110
3.4. Lubrication and Maintenance Chart
After 20 hours of operation (daily)
3.6.1. Engine oil level check
3.6.2. Engine cooling liquid level check
3.6.3. Hydraulic tank oil level check
3.6.4. Crankcase breather tube
3.6.5. Check of the fan and engine belt condition
3.6.6. Checking the vacuum valve of the air cleaner
3.6.7. Checking warning and control device
After 100 hours of operation (weekly)
3.6.8. Checking the tyre pressure
After 250 hours of operation (3 months)
3.6.9. Checking the engine inlet piping
3.6.10. Check of the fan and engine belt condition
3.6.11. Check of coolers
3.6.12. Battery check
3.6.13. Air lter sensor check
3.6.14. Machine lubrication
3.6.15. Checking oil in the vibrator
3.6.16. Check of oil level in the travel gearboxes
3.6.17. Inspect the pad foot segments
After 500 hours of operation (after 6 months)
3.6.18. Replacing oil in the engine
3.6.19. Fuel lter replacement
3.6.20. Engine cooling liquid check
3.6.21. Check of wiring
3.6.22. Checking tightening bolts of wheel
After 1,000 hours of operation (after 1 year)
3.6.23. How to check tightening pulley and belt of the engine
3.6.24. Oil exchange in the travel gearboxes *
3.6.25. Checking the damping system
To Next Page
Loading...
