Ammann ASC 110 - After 250 Hours of Operation (3 Months); Checking the Engine Inlet Piping

120 ASC 110
1
3
2
3.6. Individual Operations of Maintenance
After 250 hours of operation (3 months)
3.6.9. Checking the engine inlet piping
Check the tightness of engine inlet piping.•
Check for any damage of the rubber hose of the inlet piping •
leading from the lter, and for missing clamping clips.
Check again tightness between the bonnet 2 and the air •
cleaner 3.
Replace damaged sealing 1 with a new one.•
Do not operate the machine if the sealing
between the bonnet and the air cleaner
is damaged or not tight.