Ammann ASC 110 - Check of the Fan and Engine Belt Condition

121ASC 110
MAINTENANCE MANUAL
3.6.10. Check of the fan and engine belt
condition
Check the ventilator visually. In case of any damage (e.g. •
missing parts of the material, cracks, changes in shape etc.)
replace the ventilator.
Lift the belt-tensioning pulley using the lever and remove •
the belt.
Check visually the belt, for intersecting crakcks. Traverse •
(across the belt width) cracks are acceptable. Longitudinal
(direction of belt length) cracks that intersect with traverse
cracks are not acceptable. Replace the belt if it is frayed or
has pieces of materiál missing.