163ASC 110
MAINTENANCE MANUAL
3.6.36. Cleaning the machine
Clean the machine from major impurities after nishing •
your work.
Perform overall cleaning regularly at least once in a week. •
When working in cohesive soils, cement and lime stabilisa-
tion’s, the overall cleaning must be performed daily.
Blind all openings into which the clean-
ing agent might penetrate (e.g. engine
inlet opening) prior to pressure water
washing. Remove these blinders after
washing the machine.
Do not expose electric parts or insula-
tion material to direct water or steam
ow. Always cover such materials (inside
of the alternator etc.).
Disconnect batteries using the isolating
master switch.
Work with stopped engine.
Do not use aggressive and highly inam-
mable cleaning agents (e.g. petrol or
highly inammable materials).
Follow environmental standards and
regulations when cleaning the machine!
Clean the machine in a site equipped
with an intercepting system for cleaning
agents so that the soil and water sources
are not contaminated!
Do not use forbidden cleaning agents!
To Next Page
Loading...
