Ammann ASC 110 - Checking Warning and Control Devices

118 ASC 110
100
220
180
250
J1939
F8 - 1A
F7 - 20A
F6 - 15A
F5 - 5A
F4 - 1A
F3 - 7,5A
F2 - 10A
F1 - 20A
ACE
°C
IDLE
IDLE
277022
3
1
2
ACE
277023
3.6. Individual Operations of Maintenance
3.6.7. Checking warning and control devices
Turn ON the switches, test if horn, lights and direction in-•
dicators lights work. Turn ON the ignition key to position I,
check brake pilot lamps for brake, neutral, and for recharg-
ing. ROPS2D indicator lamp will light up shortly along with
warning alarm heard.
Start the engine, press TOTAL STOP - engine stalling must •
occur, pilot lamps go ON.
If ROPS2D indicator lamp continues to
icker, carry out troubleshooting.