3.6. Individual Operations of Maintenance
Screw the drain plug 1 back on. Unscrew the inspection •
plug 2 and ll 6 l (1.59 gal US) through the oil ller. Start up
the engine, turn on vibration for a short time, and ll up oil
to the bottom edge of the inspection hole.
! NOTE !
Exchange oil when it is warm, preferably after the
machine stops.
Let drained oil cool down to less than 50 °C
(122 °F).
Rell the identical type of oil.
Avoid leakage of oil to the soil.
To Next Page
Loading...
