1 Clamping hazard imminent danger of being pressed. (Symbols located left
and right on the frame)
2 Burn hazard imminent risk of burn. Do NOT touch hot parts of the Ma-
chine unless you make certain these have cooled out suf-
ciently. (Symbol located from within on the LH door)
3 Risk of injury imminent risk of cutting oneself and/or chipping o. Do
NOT touch rotating parts if the engine is running. (Sym-
bol located on LH side of the cooler).
4 Cooling liquid imminent risk of scald. Do NOT open expansion tank lid
until liquid cools down below 50 °C (122 °F). (Symbol lo-
cated on expansion tank)
5 Adjust while at rest Switch OFF the engine and remove the key from ignition
box before carrying out any maintenance or repair. (Sym-
bol located from within on LH door)
6 Read Operation Manual Read Operation Manual before starting the Machine.
(Symbol located on LH side of the actuator panel)
To Next Page
Loading...
