Draining procedure:
Move the machine to a rm base. The lling valves should •
be in the extreme lower position (1). Secure the drum with
blocks on both sides.
Unscrew the removable valve insert and let the solution
•
ow out.
The solution can spurt out after unscrew-
ing the valve insert.
As soon as the solution does not ow out due to a decrease •
in pressure, screw on the ller neck and inate the tyre to a
pressure of 160 kPa (23,2 PSI).
After the tyre has been inated, remove the ller neck and
•
screw the valve insert back on.
Protect your eyes with glasses (face shield)
and your hands with rubber gloves!
Add anhydrous calcium chloride CaCl
2
to
water, never vice versa!
Wash away spilled solution with clean
water.
Solution may never come into contact
with metal parts and wiring.
To Next Page
Loading...
