2.9. Zvláštní podmínky použití stroje
Turn the bonnet raising lever to the horizontal position.
Insert control lever into the hand pump and start pumping until
brake indicator lamp on cluster (25) goes OFF.
Now the Machine is braked o, and it will be possible to tow it
away.
Due to leakage the pressure in the brakes
may lower in course of towing.
Check regularly the Machine brakes do
not become hot in course of towing the
Machine.
If brake indicator lamp will go ON in
course of towing, stop towing the
Machine and start pumping until the in-
dicator lamp goes OFF!
When towing is completed, secure the
Machine with scotch blocks against its
driving away, and carry out the applica-
tion of its brakes!
Switch over the key in ignition box to “ I“ position.
Note
If the key remains in “I“ position for more than 15 seconds the
acoustic alarm will switch ON – to warn operator the battery has
been discharged.
To Next Page
Loading...
