Photo 2.8.1
3. Once the lubricant has been applied to the rail exercise the table by pressing the "table" button moving it
back and forth a couple times to spread the lube.
2.8.2 Linear Guide Rail - Carriage
Tools needed.
o
Synthetic Oil (P/N: 150646-001)
1. lubrication of the carriage linear guide rail is also needed for every 100 kilometers (62 miles) of travel. This
is equivalent to about 2,200 print cycles.
2. To lubricate we must first release our print carriage. (MENU > MAINTENANCE FUNCTIONS > CARRIAGE
CONTROLLER > RELEASE CARRIAGE)
To Next Page
Loading...